COOL PRO
CoolPro - AF - Air cooled aftercooler
Air flow 0,6 - 20 m³/min.
The CoolPro - AF aftercoolers employ ambient air to chill the output air at the compressor, resulting in an output temperature only 10°C higher than ambient. This cooling creates condensation of up to 80% of the moisture in the compressed air, which can be separated using an AS/MS centrifugal condensate separator mounted at the aftercooler output.
The AF air aftercoolers consist of a heat exchanger with a finned coil cooled by a high-efficiency axial fan installed on a galvanized and painted sheet construction.
Benefits:
-
Robust design appropriate for heavy-duty industrial operating environments.
-
Suitable for any purpose or application.
-
Matching condensate separators.
-
Excellent quality.
Technical Specifications:
-
Exchange the coil with copper pipes and aluminum fins.
-
High efficiency, permanently lubricated, low noise fan.
-
Galvanized and painted sheet structure
-
Protection grids;
-
The centrifugal condensate separator is provided, and the electric power supply is 230V ± 10%/1Ph/50 Hz (AF007-013) or 400V ± 10%/3Ph/50 Hz (AF025-201).
-
Maximum operating pressure is 16 bar (g).
-
The maximum compressed air input temperature is 200 degrees Celsius.
Accessories & Kits:
-
High operating pressure: 40 bar (g) with coupled condensate drains.
COOL PRO
CoolPro - WE/WF - Water cooled aftercooler
Air flow 1,5 - 640 m³/min.
CoolPro - WE/WF series final water coolers enable for efficient and cost-effective compressed air purification by cooling the air at the compressor outlet to only 10°C higher than the inlet water temperature. This cooling creates condensation of up to 80% of the moisture in compressed air, which can be separated using an AS/MS centrifugal condensate separator mounted at the cooler's outlet.
The WE/WF final coolers are made up of a shell and tube exchanger that is cooled in perfect countercurrent by a flowing cooling water.
Benefits:
-
Robust design appropriate for the harsh circumstances of common industrial tasks;
-
Helical exchanger pipes provide greatest heat exchange efficiency while minimizing pressure loss;
-
Heat exchange in perfect countercurrent.
-
Suitable for any purpose or application.
-
Combined condensate separators.
-
Flanges from WF225 to WF6400 and nipples from WF015 to WF165 are provided.
Technical Specifications:
-
Copper helical exchanger pipes
-
carbon steel vessel with primer paint and water-soluble acrylic varnish
-
centrifugal condensate separator.
-
The maximum operating pressure is 16 bar(g) (WF015-1030) and 10 bar(g) (WF1250-6400)
-
Maximum compressed air inlet temperature of 200°C.
Accessories & Kits:
-
Version of vertical installation;
-
Tube and shell are either fixed or detachable.
-
Version with copper pipes and a coating of carbon steel for common applications;
-
Version with pipes and layers of stainless steel for applications with harsh cooling gas and water;
-
Version with stainless steel pipes and a coating of carbon steel for applications with hostile gases;
-
Version for high working pressure: 40 bar(g) or more (special);
-
Version with pipes and coating in copper-nickel for usage in the marine environment.
-
Condensate drains are timed/capacitive.
