top of page
TAURUS TECH Air cooled chillers

TAURUS TECH

Air cooled chillers

Nominal cooling capacity 74 ÷ 148 kW.

The TAURUS TECH series chillers with R410A refrigerant are the finest solution for centralised hydronic air conditioning in medium-sized regions where reliability and energy efficiency are critical. The high efficiency scroll compressors, massive heat exchangers, and technical solutions used provide optimal performance in all operating situations. The parametric microprocessor control, which is accessible via a user-friendly interface, enables for simple modification of the unit's operating settings. The large range of options and configurations allows you to meet the majority of installation requirements while also making system startup and management easier.

TECHNICAL FEATURES

COOLING

COOLING

ROLLING

SCROLL COMPRESSOR

PLATE HEAT EXCHANGER

HEAT EXCHANGER 
(PLATE AND SHELL TUBE)

FAN

FAN

Benefits:

  1. Seasonal efficiency conforms to the requirements specified by the ErP regulation for the SEER index.

  2. Acoustic setups SHE and SSN with lower noise levels;

  3. High full load efficiency (EER).

  4. Extended working limitations for starting and operating even under the toughest situations;

  5. A wide range of solutions and kits for easy installation;

  6. Easy access to all internal components.

Options:

  1. Features include a low ambient temperature option (down to -20°C) and high-efficiency EC brushless fans.

  2. Shell and tube evaporator.

  3. A single or double water pump with low or medium head pressure.

  4. Water storage tank;

  5. Full or partial heat recovery;

  6. Heaters with antifreeze protection for heat exchangers, pumps, and water accumulation tanks (if included);

  7. IN/OUT compressor valves.

  8. Hydraulic group protection using covering panels or metallic mesh.

  9. Condenser coils are protected with metallic filters or metallic mesh.

  10. Protective coating for condenser coils, appropriate for installation in harsh situations;

  11. Soft starters cut the starting current by 30%.

Standard features:

  1. The system includes R410A refrigerant, hermetic scroll compressors on a single circuit, crankcase heater compressor and phase monitor, and a plate evaporator.

  2. Axial fans use die-cast aluminum blades and AC motors.

  3. Electrical cabinets have an IP54 protection grade.

  4. Parametric microprocessor control

  5. Electronic expansion valve.

  6. Air-cooled condensers (copper tubes/aluminum fins) with longitudinal "V"-shaped configuration;

  7. Features include high and low refrigerant pressure switches, as well as refrigerant pressure meters for various conditions.

  8. Soft starters cut the starting current by 30%.

Kits:

  1. include antivibration mounts, replica remote user displays (LED or LCD), an RS485 ModBus kit for connecting to supervisor systems, and the xWEB300D EVO supervisor system.

  2. Modularity kit (master/slave arrangement of two to five units).

  3. Soft starters cut the starting current by 30%.

There are three acoustic configurations: basic (HE), low noise (SHE), and very low noise (SSN).

TAURUS G Air cooled chillers

TAURUS G

Air cooled chillers

Nominal cooling capacity 73 – 145 kW.

The TAURUS G series chillers are the most environmentally friendly alternative for centralised hydronic air cooling in medium-sized regions. High efficiency scroll compressors and excellent technical solutions ensure high performance under all working situations. The parametric microprocessor control, which is accessible via a user-friendly interface, enables for simple modification of the unit's operating settings. The large selection of accessories and versions provides solutions to the most diverse installation needs while also enabling system installation, startup, and management.

TECHNICAL FEATURES

COOLING

COOLING

ROLLING

SCROLL COMPRESSOR

PLATE HEAT EXCHANGER

HEAT EXCHANGER 
(PLATE AND SHELL TUBE)

FAN

FAN

Benefits:

  1. R454B is a low-GWP refrigerant (466 GWP).

  2. Seasonal efficiency in accordance with the specifications specified by the ErP regulation for SEER (Tier 2, 01/01/2021).

  3. Acoustic setups SHE and SSN with lower noise levels;

  4. High full load efficiency (EER).

  5. Extended working limitations for starting and operating even under the toughest situations;

  6. A wide range of solutions and kits for easy installation;

  7. All internal components are now more easily accessible.

Standard features:

  1. R454B refrigerant, hermetic scroll compressors on a single circuit.

  2. The crankcase heater includes a compressor and phase monitor, as well as a plate evaporator.

  3. Axial fans equipped with die-cast aluminum airfoil blade profiles and AC motors;

  4. Electrical cabinets have an IP54 protection grade.

  5. Parametric microprocessor control

  6. Features include an electronic expansion valve and air-cooled condensers with a longitudinal "V" shape arrangement made of copper tubes and aluminum fins.

  7. Switches for high and low refrigerant pressure.

  8. Refrigerator pressure gauges.

Options:

  1. Features include a low ambient temperature option (down to -20°C) and high-efficiency EC brushless fans.

  2. Shell and tube evaporator.

  3. A single or twin water pump with low or medium head pressure.

  4. Water storage tank;

  5. Heaters with antifreeze protection for heat exchangers, pumps, and water accumulation tanks (if included);

  6. IN/OUT compressor valves.

  7. Hydraulic group protection using covering panels or metallic mesh.

  8. Condenser coils are protected with metallic filters or metallic mesh.

  9. Protective coating for condenser coils, appropriate for installation in harsh situations;

Kits:

  1. Features include anti-vibration mounts and a replica of the remote user display (LED or LCD).

  2. RS485 ModBus kit connects to supervisor systems, including the xWEB300D EVO.

  3. Modularity kit (master/slave setup for 2 to 8 units).

  4. Soft starters cut the starting current by 30%.

There are three acoustic configurations: basic (HE), low noise (SHE), and very low noise (SSN).

PHOENIX G Air cooled chiller

PHOENIX G

Air cooled chiller

Nominal cooling capacity 263 ÷ 1364 kW.

The PHOENIX G series chillers, which use R513A refrigerant, are the optimum choice for centralized hydronic air conditioning in medium and large spaces (such as airports, shopping malls, and cinemas), assuring energy savings in compliance with the ERP Eco Design directive. The screw compressors installed on PHOENIX G chillers are designed and optimized for R513A, and owing to the "Smart Stepless" software algorithm, they can offer the appropriate cooling capacity according to the system's requirement, even in conditions with high load variability.
Condensing units are modular, allowing fans to stop gradually based on the momentary heat demand, hence increasing the equipment' seasonal energy efficiency. The units are managed by a control microprocessor, which manages all major functions autonomously, including adjustments, alarms, and the external interface.

TECHNICAL FEATURES

COOLING

COOLING

ROTARY COMPRESSOR

SCREW COMPRESSOR

PLATE HEAT EXCHANGER

HEAT EXCHANGER 
( SHELL TUBE)

FAN

FAN

Benefits:

  1. Features include low GWP R513A refrigerant, high seasonal energy efficiency (SEER), Eurovent-certified performance, and extended operating limitations.

  2. Noise reduction to -9 dB(A).

  3. Customizable choices and kits.

  4. "Smart Stepless" regulation adapts to any operating state.

Standard features:

  1. R513A refrigerant

  2. Semi-hermetic screw compressors with "Smart Stepless" regulation  

  3. Compressor crankcase heaters and phase monitor

  4. Micro-channel condensing coils

  5. EC Brushless fans • Electronic expansion valves

  6. Single pass shell and tube evaporator optimized for R513A refrigerant

  7. Standard "Victaulic" hydraulic connection kit

  8. IP54 electrical cabinet protection grade  

  9. Programmable controller with software specifics

Options:

  1. Features include a minimum ambient temperature of -20°C, a single pump with low (P2) or medium (P3) head pressure, and a double twin pump with low or medium (P3) head pressure.

  2. Storage tank (up to model 6002).

  3. Anti-freeze heaters for the heat exchanger and hydraulic module.

  4. Compressor shut-off valves (for suction);

  5. Finned pack condensing coils using copper tubing and aluminum fins;

  6. Painted protective treatment for condensing coils.

  7. Metal mesh protective filters for condensing coils.

  8. Compressor soft starter;

  9. Compressor soundproof housing (HEX variant)

  10. Complete soundproof covering panels for the compressors and hydraulic compartment.

  11. Total heat recovery (up to model 6002, except model 3601).

Kits

  1. Features include antivibration mounts and metal mesh filters to protect condensing coils.

  2. Features include a remote user terminal, the xWEB300D PRO supervision system, and the xVISION web-based remote administration and monitoring platform.

  3. Modularity kit (master/slave of 3 to 7 units).

Versions HEX and SSX models offer high efficiency and low noise levels, respectively.

ARIES TECH 2 Air cooled chillers

ARIES TECH 2

Air cooled chillers

Nominal cooling capacity 164 ÷ 945 kW.

The ARIES TECH 2 chillers with R410A refrigerant are the optimum solution for medium and large hydronic air conditioning systems (such as hospitals, offices, shopping malls, etc.), providing significant energy savings in all operating circumstances. The design concept is strongly aimed toward lowering running costs and protecting the environment. This range's major features are scroll compressors for improved seasonal energy efficiency, high efficiency shell and tube exchangers for better energy savings, and total heat recovery for long-term usage of absorbed electricity. The large selection of accessories and versions provides solutions to the most diverse installation needs while also enabling system installation, start-up, and management.

TECHNICAL FEATURES

COOLING

COOLING

ROLLING

SCROLL COMPRESSOR

PLATE HEAT EXCHANGER

HEAT EXCHANGER 
( SHELL TUBE)

FAN

FAN

Benefits:

  1. Seasonal energy efficiency in accordance with ErP EcoDesign requirements for SEER.

  2. Large operational limits for starting up and working even in the toughest conditions.

  3. A variety of alternatives and kits for easy installation;

  4. Easy access to all components.

  5. Advanced electronic control with an integrated web server.

Standard features:

  1. R410A refrigerant, with 4, 6, or 9 scroll compressors on two independent circuits.

  2. Crankcase heater compressor and phase monitor.

  3. Victaulic hydraulic connection kit (comes included with each unit);

  4. Electronic expansion valve.

  5. Axial fans equipped with protective grilles and sickled blades with die-cast aluminum airfoil profiles;

  6. Electrical cabinets have an IP54 protection grade.

  7. Refrigerant charge, non-freezing oil, and factory testing;

  8. Electronic microprocessor controller with a large computing capability and a simple graphical interface;

  9. Modbus RS485 serial output for connection to supervisory systems.

  10. Master/slave arrangement is controllable between two units.

Options:

  1. Available in two versions: low water temperature (outlet water temperature as low as -10°C) and low ambient temperature (down to -20°C).

  2. Stainless steel shell and tube evaporator

  3. A single or twin water pump with low or medium head pressure.

  4. Water storage tank;

  5. IN/OUT compressor valves.

  6. High efficiency EC brushless fans (basis equipment for the SSN variant).

  7. Total heat recovery.

  8. Protection coating for condenser coils, appropriate for installation in harsh locations;

  9. Microchannels condenser coils.

  10. Heat exchangers and hydraulic modules may be equipped with antifreeze heaters.

  11. Metallic mesh filters to protect condenser coils.

  12. Soundproof jacket or casing for compressors (for HE arrangement)

  13. Compressors can benefit from soft starts, which lower inrush current by 20%.

Kits:

  1. The package includes antivibration mountings, a metal mesh filter kit to protect condenser coils, a replica remote user terminal kit, and the xWEB300D EVO supervision system.

  2. Modularity kit for xDRIVE (master/slave from 3 to 8 units).

  3. Metallic mesh filters to protect condenser coils.

  4. Soundproof jacket or casing for compressors (for HE arrangement)

  5. Compressors can benefit from soft starts, which lower inrush current by 20%.

There are three acoustic configurations: basic (HE), low noise (SHE), and very low noise (SSN).

ARIES G Air cooled chillers

ARIES G

Air cooled chillers

Nominal cooling capacity 161 – 930 kW.

The ARIES G chillers are the finest solution for medium and large hydronic air conditioning systems (such as hospitals, offices, shopping malls, etc.), providing significant energy savings in all operating circumstances. The introduction of the low GWP refrigerant R454B emphasizes the design philosophy of lowering operational costs and protecting the environment. This range's major features are scroll compressors for improved seasonal energy efficiency, high efficiency shell and tube exchangers for better energy savings, and total heat recovery for long-term usage of absorbed electricity. The large selection of accessories and versions provides solutions to the most diverse installation needs while also enabling system installation, start-up, and management.

TECHNICAL FEATURES

COOLING

COOLING

ROLLING

SCROLL COMPRESSOR

PLATE HEAT EXCHANGER

HEAT EXCHANGER 
( SHELL TUBE)

FAN

FAN

Benefits:

  1. R454B is a low-GWP refrigerant (466 GWP).

  2. Seasonal efficiency in accordance with the specifications specified by the ErP regulation for SEER (Tier 2, 01/01/2021).

  3. Acoustic setups SHE and SSN with lower noise levels;

  4. Extended working limitations for starting and operating even under the toughest situations;

  5. A wide range of solutions and kits for simple installation.

  6. Easy access to all internal components.

  7. Advanced electrical control with web server integration.

Standard features:

  1. The refrigerant R454B is used with 4, 6, or 9 hermetic scroll compressors coupled in tandem or trio in two or three circuits.

  2. Crankcase heater compressor and phase monitor.

  3. Each device comes with a "Victaulic" hydraulic connections kit and a shell and tube evaporator.

  4. Electronic expansion valve.

  5. Axial fans come with safety grids and die-cast aluminum airfoil blade shapes.

  6. Electrical cabinets have an IP54 protection grade.

  7. Refrigerant and oil charges;

  8. Factory tests and inspections;

  9. Electronic microprocessor controller with a touch screen user interface.

  10. Modbus RS485 serial output for connecting to supervisory systems;

Options:

  1. MWT variant (outlet water temperature as low as -10°C);

  2. Low ambient temperature option (down to -20°C);

  3. Stainless steel shell and tube evaporator.

  4. A single or twin water pump with low or medium head pressure.

  5. Water storage tank;

  6. Heaters with antifreeze protection for heat exchangers, pumps, and water accumulation tanks (if included);

  7. IN/OUT compressor valves.

  8. Soundproof jacket or casing for compressors (for HE arrangement)

  9. High efficiency EC brushless fans (the base choice for the SSN version).

  10. Total heat recovery.

  11. Protection coating for condenser coils, appropriate for installation in harsh locations;

  12. Microchannels condenser coils.

  13. Metallic mesh filters to protect condenser coils.

  14. Soft starters cut the starting current by 20%.

Kits:

  1. Features include antivibration mountings, a replicated remote user display, the xWEB300D PRO supervision system, and a modularity kit that allows for master/slave configurations of 3-7 units.

There are three acoustic configurations: basic (HE), low noise (SHE), and very low noise (SSN).

iPHOENIX G Air cooled chillers.

iPHOENIX G

Air cooled chillers.

Nominal cooling capacity 266 ÷ 1383 kW.

The iPHOENIX G series chillers, which use the low GWP refrigerant R513A, are the inverter solution for medium and large hydronic air conditioning systems (such as hospitals, workplaces, and shopping malls), ensuring energy savings in line with the ErP EcoDesign mandate.
The screw compressors equipped with variable-speed inverter technology are capable of delivering the correct cooling capacity as requested by the system, even in instances of significant load variability.
The modular condensing portion, as well as the fans' gradual regulation of condensation pressure, allow the units' seasonal energy efficiency to be increased even further.

TECHNICAL FEATURES

COOLING

COOLING

ROTARY COMPRESSOR

SCREW COMPRESSOR

PLATE HEAT EXCHANGER

HEAT EXCHANGER 
( SHELL TUBE)

FAN

FAN

Benefits:

  1. R513A refrigerant has a low GWP.

  2. High seasonal energy efficiency (SEER).

  3. The variable-speed inverter technology and the Step regulation allow optimum flexibility, adjusting capacity to all working situations.

  4. Extend operating limits;

  5. Complete safety equipment, including phase monitor, pressure switches, differential pressure switch, crankcase warmers, and monitoring of the working envelope and compressor's oil level;

  6. A diverse choice of alternatives and kits for customized solutions.

Standard features:

  1. The refrigerant R513A is used in single circuits with variable-speed inverter screw compressors (mod.2501-4001) and twin circuits (1+i) with variable-speed inverter and step regulation screw compressors (mod.4302-12202).

  2. The system includes a crankcase heater and phase monitor, as well as "V" shaped air-cooled condensers made of copper tubes and aluminum fins.

  3. Electronic expansion valve.

  4. Shell and tube evaporator is optimized for R513A.

  5. Victaulic hydraulic connection kit (comes included with each unit);

  6. Electrical cabinets have an IP54 protection grade.

  7. Programmable controller with large computational capability and an easy-to-use graphic interface; communication and supervision by Ethernet, USB, and RS485

Options:

  1. Features include a low ambient temperature version (down to -20°C) and a single pump with low to medium head pressure.

  2. Twin pumps with low to medium head pressure;

  3. Water storage tank (up to model 6002);

  4. Heat exchangers and hydraulic modules may be equipped with antifreeze heaters.

  5. Compressor suction valves.

  6. AC axial fans are standard on HE. High efficiency EC brushless fans are standard on SSN and available as an option for HE.

  7. Microchannel condenser coils.

  8. Protection coating for condenser coils, appropriate for installation in harsh locations;

  9. Metallic mesh filters protect condenser coils;

  10. Compressors soundproof housing (HE configuration);

  11. Completely soundproof housing (hydraulic and compressor compartment)

  12. Total heat recovery (up to model 6002, excluding model 4001).

Kits:

  1. The package includes an antivibration mounting kit, metallic mesh filters for coil protection, a replica remote user terminal kit, an RFI filter, and the xWEB300D PRO supervision system.

  2. Modularity kit (master/slave of 3 to 7 units).

There are three acoustic configurations: basic (HE), low noise (SHE), and very low noise (SSN).

ARIES N Air cooled liquid chillers featuring reciprocating compressors with propane.

ARIES N

Air cooled liquid chillers featuring reciprocating compressors with propane.

Nominal cooling capacity 177 - 334 kW

iASN and ASN air-cooled industrial process chillers are specifically developed to provide unwavering dependability in the most demanding industrial environments.
We are fully devoted to assisting the green transition of energy systems to an all-inclusive solution. ARIES N and iARIES N chillers combine advanced technologies with the use of natural refrigerant R290, which has no negative environmental impact, to provide a long-term sustainable solution.
As standard, all of the primary hydraulic and mechanical components are incorporated within the chiller.
An large range of choices, combined with wide operating limitations, confirms iASN and ASN as the optimal plug-and-play solution for a variety of process cooling applications.

TECHNICAL FEATURES

COOLING

COOLING

piston compressor

PISTON  COMPRESSOR

PLATE HEAT EXCHANGER

HEAT EXCHANGER 
( SHELL TUBE)

FAN

FAN

Standard features:

  1. Natural refrigerant R290 - Propane

  2. 2 reciprocating compressors in two circuits. 1+I arrangement on iASN, with compressor crankcase warmer and phase monitor.

  3. Integrated enclosure and acoustic insulation in the compressor compartment;

  4. Brazed plate evaporator heat exchanger.

  5. Microchannel condenser coils.

  6. Axial fans come with safety grids and die-cast aluminum airfoil blade profiles (EC is standard on iASN);

  7. Electronic expansion valves.

  8. Electrical cabinets have an IP54 protection grade.

  9. Electronic microprocessor controller with a touch screen user interface.

  10. Modbus RS485 serial output for connection to supervisory systems.

  11. Features include IN/OUT compressor valves and a "Victaulic" hydraulic connection kit (provided per unit).

  12. Extensive tests and verifications conducted in the factory;

  13. Refrigerant and oil charges.

Options

  1. MWT variant (outlet water temperature as low as -10°C);

  2. Low ambient temperature option (down to -20°C);

  3. Single or dual water pumps with low (P2) or medium head pressure (P3).

  4. Water storage tank;

  5. Heaters with antifreeze protection for heat exchangers, pumps, and water accumulation tanks (if installed);

  6. High efficiency EC brushless fans are standard on iASN.

  7. Protective epoxy coating for condenser coils, for installation in harsh situations;

  8. Finned pack condensing coils using copper tubing and aluminum fins;

  9. Metal mesh filters protect condenser coils.

Kits

  1. Anti-vibration mounts.

  2. Metal mesh filters protect condenser coils.

  3. Modularity kit (master/slave with 3 to 7 units);

  4. XVISION is a web-based remote management and monitoring platform.

bottom of page